PS there are programs that dealers are provided with the option of helping the customer out one time after the warranty has ran out. If you have a good relationship with the dealer and if you are NICE then they may help you. But they do not HAVE to.
Tuesday, December 30, 2008
2004 Ford Focus put key into ignition and it won't turn
PS there are programs that dealers are provided with the option of helping the customer out one time after the warranty has ran out. If you have a good relationship with the dealer and if you are NICE then they may help you. But they do not HAVE to.
Sunday, December 28, 2008
BMW X6 by Hamann
Of course, the term-du-jour is Crossover, which is what Hamann-Motorsports uses to describe the X6. But their treatment is a little more adventurous than that. Hamann boosts the X6's 3.5i gasoline/petrol version from 306 to 360 hp and the 3.5d (diesel) from 286 hp to 320 hp. Cranking power is also considerably elevated by 140 Nm to 540 Nm in the 3.5i and taken to a massive 660 Nm in the 3.5d from a previous 580 Nm.
On the outside, Hamann offers the option of 23-inch rims, in need of 315/25R23 tires. Oh, and the price tag for just the four wheels is 9,385 euros. Yes, this is an audacious tuner that also messes with the BMW sound with a four-pipe exhaust system that gives the X6 a more grounded sound.
The tuning kit also comes with a collection of spoilers and skirts and the interior gets a once-over with special carbon-fiber materials too. But Hamann is a performance tuner and this X6 definitely puts on a show.
Thursday, December 25, 2008
Personalize Your Pony and Avoid Stock 'Stangs
Did we mention that Mustang owners thrive on speed? Did we even have to mention it? AmericanMuscle knows this, and to make sure you can squeeze every last pony out of that Mustang engine, we offer a number of different Mustang superchargers that are the absolute last word in horsepower and torque. And when we say that, we mean you can generally look to add over 100 HP and around 65 ft-lbs. of torque with these superchargers. These bad boys don't mess around when it comes to getting the ponies out from under the hood and onto the road.
So, now that you've added all those ponies, you're going to need to make sure you're not going to be losing any because of drag or wind resistance. Which means that a Mustang spoiler could be right up your alley. In addition to those previously mentioned benefits, spoilers help to increase fuel efficiency and will give any Mustang an aggressive look that tells people to keep their distance or else you might blow their doors in.
On the few occasions that you're going slow enough for people to see your Mustang, they're more than likely going to be seeing your front end first. And one of the most noticeable customizations you can make to your front end is a new Mustang grille. We stock both upper and lower grilles for Mustangs, sleek mesh grilles or even billet grilles that will shine bright for as long as you own your Mustang.
AmericanMuscle also offers a wide variety of Mustang decals. You're proud of your car and you're proud that you've turned it into something that you can truly call original and your very own, so why not show off your trophy? Bumper inserts are a simple way to do this, as are Lemans stripes and rocker strips. Or maybe you'd even like to sport an AmericanMuscle decal and let everybody know where you got all this great stuff to add to your Pony? Just a suggestion.
I want a new car for Christmas
Wednesday, December 24, 2008
1996 Chrysler Sebring the key is stuck in the ignition
I only had 1 key to my 1996 Chrysler sebring, so about a month ago I went to a local locksmith and they made me a copy of the original key. I am not for sure, but I am guessing that my original key has a chip in it because it is a factory or dealership key w/ black top. My sebring is equipped with the anti-theft system, of which when I purchased the car used, I did not receive the key-less remote to. Anyways, my question or problem is this: I have been using the copy key for the entire month with no problems until a week ago...the key is stuck in the ignition on acc. and will NOT turn all the way to lock so I can get it out! It is STUCK and WILL NOT COME OUT!!!! What could be causing this and how do I get it out? Is it because it isn't the chip key and if so how could I use it before now without any issues? HELP!!!!
ANSWER:
Any Chrysler's keys with a black top do not have a chip, they are usual blank keys.
Keys with a chip ( transponder) have a gray top, like this one:
Your anti-theft system contains the switches that are located inside the front doors and when you turn your door lock cylinder ( driver or passenger) a switch send an ON or OFF signal to the Body controller.
Your problem with the stuck key is only mechanical failure of the ignition lock cylinder.
There is nothing related to a "chip" technology.
You should replace the ignition lock cylinder.
Saturday, December 20, 2008
Friday, December 19, 2008
Advice on Questions to Ask When Buying A Car
The best advice I can give you is to take your time when looking for a car, and don't make any rash, emotional car buying decisions.
Every car salesman you come into contact with will have only one thing on his or her mind; to get you to buy a car "today!" These people work under the assumption that you will never come back, so they have to close the deal while you're in there the first time.
Don't give into the pressure. Take your time and sleep on it . . . for several nights! You'll be amazed at how different your perspective will be on a car deal after a couple of days.
Don't let the car salesperson talk you into giving them any .... read more
Wednesday, December 17, 2008
Blower Motor is rubbing and vibrating the whole dash board
Heater System Blower Motor
Removal & Installation
1) Remove the insulator from under the right side of the dash.
2) Disconnect the electrical connector from the blower motor.
3) Remove the blower motor retaining screws.
4) Remove the blower motor.
To Install:
1) Install the blower motor.
2) Install the blower motor mounting screws.
3) Connect the electrical connector to the blower motor.
4) Install the under dash insulator.
Sunday, December 14, 2008
theft system has locked my car down can't start it. took battery
The best thing to do would be to get a lock smith to come and check it. They will normally charge about $65, which is less than the dealer, minus the tow charge. They will pinpoint what part is needed.
Tuesday, December 9, 2008
heater blowing cold air
Answer:
The Hot/Cold blend door actuator is stripped out. This is why you hear a noise and why it won’t move to hot air flow. Have it replaced.
Where can you find free online auto repair manuals ?
Free Online Auto Repair Manuals
Monday, December 8, 2008
Sunday, December 7, 2008
I have a 1996 GMC truck that has a p0154 code
Saturday, December 6, 2008
Thursday, December 4, 2008
Tuesday, December 2, 2008
I have a 2002 Chevy Silverado Reg Cab 1500 and I changed the battery but it still doesn't start.
1) Engine turns over, but will not start
2) Engine does not turn over when attempting to start (nothing Happens except the lights do come on)
3) Clicks Once
4) Clicks repeatedly
5) No lights, no noise.... nothing
6) Starter motor spins, but does not engage
Then diagnose properly. Car won't start Diagnostics