Showing posts with label KIA. Show all posts
Showing posts with label KIA. Show all posts

Thursday, August 19, 2010

Kia unveils electric city car concept

Kia Pop


Kia has unveiled a concept for a three-seat electric city car that will debut at the Paris auto show next month.



Called the Pop, the zero-emissions car is just 3000mm long, the same length as the four-seat Toyota iQ minicar and 300mm longer than the two-seat Smart ForTwo.



Kia said the Pop aims to bring "innovative design chic and dramatic styling to the city car segment." The Pop has seating for two adults in the front and a single seat in the rear behind the front passenger.

Kia Pop Top

Thursday, May 28, 2009

started loosing overdrive, then drive and when we came to a stop


I just put a motor and automatic trans that has 46,000 miles on it in my sons 2003 kia rio. It runs good and was shifting fine but after a few miles we started loosing overdrive, then drive and when we came to a stop and took off again it wouldn't come out of 2nd. We had trouble with the plug on the newer trans that slips over the rod on top of the trans that connects to your shifter inside. It looks like some sort of sensor switch. It wouldn't stay connected when plugged into the wiring harness and kept the car from cranking and seemed to affect the shifting. We switched it with a used one and worked fine at first but then went back to the shifting problem. Does it sound like a tranny problem or is this piece we switched a sensor that affects when the gears change and needs to be replaced with a new one. The guy we got the motor and trans from is pretty trust worthy and will switch the trans out if its a problem.

Friday, September 19, 2008

the a/c blower does not work on settings 1 thru 3, but it will work on 4

Blower Motor Resistor


QUESTION:
We unfortunately own a 2002 Kia Sedona. the a/c blower does not work on settings 1 thru 3, but it will work on 4(max)..


ANSWER:
You have a bad blower resistor. It is accessed on the passenger side either from under the dash or through the glove box. This is about a $55.00 part and is held in by 2 screws. Here is a picture of it so you know what you are looking for.